COMPATIBILITY
Your VICTORY is compatible with all training applications including FulGaz,
MyWhoosh, Rouvy, Sufferfest and TrainerRoad.
For full details of compatibility with other products, visit www.jetblackcycling.
com/support
Your VICTORY includes a pre-installed Zwift Cog, compatible with most bikes
and removes the inconvenience of changing cassettes. If you want to use a
different cassette or freehub, you will need a cassette lockring tool and a chain
whip to change to a compatible cassette for your bike. Your local bike shop can
assist you.
The Victory is Cassette compatible. If you are wanting to install a Cassette, you
will first need to remove the Z COG. First remove the drive side Axle adaptor
holding the Zwift Cog in position. Then using a CHAIN WHIP and Cassette tool,
remove the locking Ring. This will enable you to slide the Zwift cog of the Free
hub supplied. You can now slide your 11 speed or 12 speed cassettes onto the
Victory’s freehub body. If using a 10 speed, please use the spacer provided. For
SRAM XDR users, you will need to purchase a XDR Freehub body from our
website or provider. VICTORY does not support Campagnolo.
Before attaching a cassette, follow the installation instructions provided with
your new cassette and use the recommended cassette spacer, if required.
Secure the cassette tightly on the freehub. Once in place, re-install the drive side
adapter that you removed in the first step and torque the adapter up to 6Nm.
For more tips, visit www.jetblackcycling.com/support
NOTE: Over-tightening the drive side adapter may cause damage to the bearings.
If you do not have a torque wrench, follow our recommendations of doing up
finger tight, or your local bike shop should be able to help.